Public beta FREE DURING BETA

Luxfluenz Lab / first usable offering

FEA QuickCheck Beta

Upload your part. Tell us how it is loaded. Get a verified FEA analysis.

A focused, human-reviewed linear-static check for one solid STEP part. Accepted analyses target about one hour during active beta periods.

No payment required during beta · Not instant or fully automated

One solid part Linear static Human reviewed Free during beta

How it works

Give the model enough context to mean something.

A credible result starts with a clear part, material, constraints, and loading. We review the submission before accepting it into the beta workflow.

  1. 01 / Upload

    Share one solid part

    Provide a STEP or STP file for one solid component. Assemblies, contact, and multi-body models are outside this beta.

  2. 02 / Define

    Describe material and loading

    Tell us the material properties, how the part is constrained, what loads act on it, the units, and what you want to learn.

  3. 03 / Review

    We build and verify

    A human reviews the input, constructs the bounded analysis, inspects the results, and checks reactions against applied loading.

  4. 04 / Receive

    Get the result and its limits

    Receive the relevant plots and engineering quantities, plus the assumptions and limitations that define how the result should be used.

A clear exchange

What you provide. What you receive.

INPUT / YOU

Your analysis definition

  • One solid STEP or STP part
  • Material and elastic properties
  • Yield strength when factor of safety is needed
  • Constraints and their physical meaning
  • Force, pressure, torque, or gravity with units and directions
  • The specific engineering question to answer
OUTPUT / LUXFLUENZ

Your checked result

  • Stress results
  • Displacement results
  • Reaction forces and moments, as applicable
  • Applied-load and reaction equilibrium verification
  • Factor of safety when yield strength is supplied
  • Analysis assumptions and material limitations

Beta boundary

Narrow by design. Explicit about limits.

QuickCheck is built for useful first-pass answers within a well-defined analysis class. If the problem falls outside that class, we will not force it into the beta workflow.

Supported

Inside the beta

  • One solid STEP/STP part
  • Linear static analysis
  • Small deformation
  • Isotropic linear elastic materials
  • Basic force, pressure, torque, and gravity where appropriate
  • Stress, displacement, reactions, and equilibrium verification
  • Factor of safety when yield strength is supplied

Not supported

Outside the beta

  • Assemblies or contact
  • Plasticity or nonlinear materials
  • Large deformation
  • Fatigue or buckling
  • Modal or vibration analysis
  • Thermal coupling or composites
  • CFD or optimization

Human review is part of the service

Fast is useful. Checked is essential.

QuickCheck does not promise an instant result. We first confirm that the geometry, material, constraints, and loads form a defensible analysis within the beta scope.

During active beta periods, accepted analyses target a turnaround of about one hour. Complex, incomplete, or unclear submissions may need follow-up or may be declined.

Free during beta

Have one part and a clear load case?

Send the geometry and define how the part is loaded. We will review whether it fits the active beta scope before analysis.

Analyze My Part

No payment required during beta.

Engineering-use note

Use the result in context.

FEA QuickCheck is an engineering analysis aid for bounded design questions. Results depend on the geometry, material data, loads, constraints, and assumptions provided. A qualified engineer should review the analysis in the context of applicable codes, safety factors, manufacturing variation, and intended use before final design, certification, or safety-critical decisions.